Powtran JI500 Series, Руководство пользователя

Страница: 121 / 164

Chapter 5 Function parameter
117
Ch
ap
ter 5
When y0.01 is set to one any non-zero number, the password protection will take effect. You
enter the menu for the next time, you must enter the password correctly, otherwise can not view
and modify the function parameters, please keep in mind the set user password.
When y0.01 is set to 0, the set user password will be cleared, the password protection
function is invalid.
y0.02
Function
parameters
display
properties
Units digit d group display selection
11111
★
Not display 0
Display 1
Tens digit E group display selection
Not display 0
Display 1
Hundreds digit b group display selection
Not display 0
Display 1
Thousands digit y1 group display selection
Not display 0
Display 1
Ten thousands digit L group display selection
Not display 0
Display 1
y0.03
User
Parameters
display
Units digit:Reserved
Tens digit
：
User‟s change parameter display selection
0
：
Not display
；
1
：
Display
00
☆
y0.04
Function code
modification
properties Modifiable 0
0
☆
Not modifiable 1
User can set whether function code parameter can be modified or not, so as to prevent the risk
that function parameters are altered unexpectedly.
If the function code is set to 0, all function code can be modified; while it is set to 1, all
function code can only be viewed, can not be modified.
5-2-21.
Fault query:y1.00-y1.30
Code Parameter name
Setting range
Factory
setting Change
limits
y1.00 Type of the first fault 0 to 51 -
●
y1.01 Type of the second fault 0 to 51 -
●
y1.02 Type of the third(at last) fault 0 to 51 -
●
Record the type of the last three faults of inverter, 0 for no fault. Please refer to the related
instructions for the possible causes and solutions for each fault code.
Failure type table:
No. Failure type No. Failure type
0 No fault 20 Encoder/PG card abnormal
1 Inverter unit protection 21 Parameter read and write abnormal
2 Acceleration overcurrent 22 Inverter hardware abnormal
3 Deceleration overcurrent 23 Motor short to ground
4 Constant speed overcurrent 24 Reserve
5 Acceleration overvoltage 25 Reserve
6 Deceleration overvoltage 26 Running time arrival
7 Constant speed overvoltage 27 Custom fault 1