PowerWalker VFI 10000 RTG, Руководство пользователя

Страница: 30 / 59

27
The following table describes the information of ups status.
Note: If other indicator appears, see troubleshooting on chapter 7.2 for more
information.
Operation status Cause Description
Standby mode The UPS is Off. UPS is operating without output.
Online mode The UPS is operating
normally.
The UPS is powering and protecting the
equipment.
Battery mode
1 beep every 4
seconds
A utility failure has
occurred and the UPS is
on Battery mode.
The UPS is powering the equipment with
the battery power.
Prepare your equipment for shutdown.
End of backup time
1 beep every 1
seconds
The UPS is on Battery
mode and the battery is
running low.
This warning is approximate, and the
actual time to shutdown may vary
significantly.
Depending on the UPS load and number of
Extended Battery Modules (EBMs), the
"Battery Low" warning may occur before
the battery reaches 20% capacity.