POWERSYS RECLOSER, Руководство пользователя

Страница: 34 / 87

- 28 -
Over
Voltage
O-V Pickup Set pickup level for over voltage
O-V Op Time Set operation time for over voltage
Use Func
Set whether over voltage function is
available
Save Set Save over voltage set value
Under
Frequency
U-F Pickup Set pickup level for under frequency
U-F Op Time
Set operation time for under
frequency
Use Func
Set whether under frequency function
is available
Save Set Save under frequency set value
Over
Frequency
O-F Pickup Set pickup level for over frequency
O-F Op Time Set operation time for over frequency
Use Func
Set whether over frequency function
is available
Save Set Save over frequency set value
Close
Interlock
Live Load Select whether live load is available
Sync Fail Select whether sync fail is available
Save Set Save close interlock set value
Loop
Automation
Loop Selection
Select operating mode for the
recloser
Deadbus Open Time
Set open time for determining
distribution line’s dead line state
Tie Sw Open Time Set Open time for tie sw
Tie Sw Source
Select whether Tie sw source is ABC or
RST
Tie Sw Close Time Set close time for tie sw
Rec Block Time Set Reclosing Blocking Time
Enable Restore
Set whether restoration after clearing
fault
Rec Close Time Set recloser closing time after open
Tie On delta I
Set delta I level to restore for Tie
recloser after fault
Save Set Save loop automation set value
Select
Group
Primary Group Select a group which will be actvated
Sel Auto Group
Select whether auto group function is
available
Reverse Group Select a alternative group
Save Sel Group Save select group set value
Default Fact Set Set all settings to factory settings
Configurat-
ion
Analog
Line Config Set 3P4W / 3P3W
Frequency Set frequency(50/60Hz)
Rated Volt Set rated voltage