POWERSYS RECLOSER Скачать руководство пользователя страница 50

Страница: 50 / 87

- 44 -

one Recloser on the power supply side, only the Recloser experienced a fault is set to

perform the opening operation.

As shown below, if the Recloser in power supply is Active state in Sequence Coordination

mode, in case of line fault, while Recloser in power supply detects the fault current and

operates the opening delayed action, it returns to normal situation by the operation of

Recloser in load side, and then Recloser in power supply will increase the operation

sequence only by one time. Therefore, only sequence of Recloser(power supply side) is in

progress without opening operation, so that even when load Recloser operates to delay

action, Recloser from supply side does not progress the other instantaneous actions in

sequence, but operates to delay action in the same way with load Recloser. If the

reclosing function is restrained, the Sequence Coordination function does not work.

The following rules apply to the Sequence coordination

1) All Reclosers both in supply side and the load must be set at same instantaneous time,

delay characteristics and the same minimum operating Pickup current value. (If the

minimum operating pickup current is wrongly set, the pickup value of power supply must

be larger than the load)

2) All Reclosers must have the same reclosing Time.

3) Recloser in supply should resume 100ms or more of delay time than load Recloser, or

the value of the minimum operating pickup current must be larger than that of load

Recloser.

4) The reset time of power supply Recloser must be set longer than the longest reclosing

time of the load Recloser. This is to prevent Recloser in supply side to be reset mode

during reclosing of load Recloser.

<Figure 5-13> Sequence Coordination

Содержание RECLOSER
























































































Результаты поиска

Содержание RECLOSER

Отзывы:

Похожие инструкции для RECLOSER

Бренды по названию

Популярные бренды

POWERSYS RECLOSER, Руководство пользователя

Результаты поиска

Содержание RECLOSER

Отзывы:

Похожие инструкции для RECLOSER

Бренды по названию

Популярные бренды