POWERSYS RECLOSER Скачать руководство пользователя страница 26

Страница: 26 / 87

- 20 -

- Trip Info Freq LED : LED which shows the recloser operates by frequency protection

elements

- Power flow LED(Reverse) : LED which shows whether forward or reverse power

flow

7) Non Reclosing Button

It is used to set whether to allow auto-reclosing sequence after the trip due to

overcurrent and protection elements. Push the button to toggle current functionality. When

the indicator turns on, reclosing operation is restricted.

8) Protection Blocked Button

It is used to restrict operation of all protection elements. It can be temporarily used to

restrict operation of all protection elements. Push the button to toggle current

functionality.

9) Ground Trip Blocked Button

It is used to set whether operation of protection elements for ground overcurrent and SEF.

Push the button to toggle current functionality. When the indicator turns on, operation of

protection elements for ground overcurrent and SEF is restricted.

10) Fault Reset Button

It is a button to reset fault and diagnosis signal LED. It reset actual fault

information with LED.

11) Battery Test Button and LED

It is a button to test battery and battery charger circuit. It shows the test result on Battery

Low LED. If battery low LED is on, which means test fail.

12) Lamp Test Button

It is a button to test LEDs. When push lamp test button, all of the LEDs are turn on.

13) Control Lock Button

It is a button to prevent control operation when doing open / close REC switch on local

or remote when turn on control lock LED. If the control lock LED is on, the protection

fun

ction of Recloser also becomes locked. Push control lock button to turn off control lock

LED and then use open / close button to operate.

14) Hot Line Tag

When Activating hot line tag function

- Operation of all protection elements is set to be single shot mode.

- It operates by fast curve.

- It restricts closed operation for the recloser from all sources.

- Tag can be only removed by the tagging source.

Содержание RECLOSER
























































































Результаты поиска

Содержание RECLOSER

Отзывы:

Похожие инструкции для RECLOSER

Бренды по названию

Популярные бренды

POWERSYS RECLOSER, Руководство пользователя

Результаты поиска

Содержание RECLOSER

Отзывы:

Похожие инструкции для RECLOSER

Бренды по названию

Популярные бренды