Admiral 38C Scrubber PB# 4100055UM Rev.* 08/10
PowerBoss, Inc. Copyright 2010
Page 75
Maintenance and Service
5.7
Rotary brush head
The rotary brush head (Fig. 29/2)
may only be assembled, disas-
sembled and adjusted by properly
trained service personnel.
The two rotary brushes (Fig. 29/3) are
not component parts of the delivery. They
must be selected separately according to
the task they are intended to fulfill (refer
to Section 4) and installed according to
the instructions on the rotary brush head
(Fig. 29/2), refer to Section 2.3.1. Nor-
mally, however, the authorized PowerBoss
workshop will install them for you prior to
delivery.
Before working on the rotary
brushes, switch off the rotary
brush head, turn the key switch to
Position 0 and remove the key.
The following applies prior to
starting any maintenance work on
the rotary brush head: Open the
deflectors and move them to their
service position (Fig. 29/1) (also
refer to Section 2.3.1, Point 1).
Fig 29
