PowerBoss, Inc. Copyright 2010
Admiral 38C Scrubber PB# 4100055UM Rev.* 08/10
Page 44
Operation
3.3.3
Stopping and parking
• Remove your right foot from the accel-
erator to slow down. When the foot is
fully removed from the accelerator, the
vehicle rolls to a stop.
• Now press the right foot on the service
brake pedal to stop the vehicle and
bring it to a stop.
• Turn the key in the key switch counter-
clockwise to lock position 0 and remove
the key.
• Press the left foot on the parking brake
pedal to park the vehicle.
Always apply the parking brake
and remove the key before get-
ting out of the vehicle!
3.3.4
Cleaning
There are four cleaning programs avail-
able for selection:
1. Wet scrubbing and vacuuming dry
2. Wet scrubbing (basic cleaning)
3. Vacuuming dry
4. Vacuuming with the hand-held suction
hose (option)
The cleaning programs are activated via
the left-hand operating panel, refer to Sec-
tions 3.2.2. Press the required button as
soon as the Admiral 38C is ready to drive
(see above).
Wet scrubbing and vacuuming dry
This program is the standard cleaning
program for this vehicle.
• Press the green PowerBoss
button on the left-hand oper-
ating panel.
Various functions can be switched on or off
with the following buttons according to the
conditions at the location of use:
Fig 22
• Reduce solution quantity (Fig. 22/1)
• Increase solution quantity (Fig. 22/3)
• Solution on/off (Fig. 22/2)
• Increase brush pressure (Fig. 22/4)
Check whether the floor is suf-
ficiently dry at regular intervals,
otherwise people could slip. If the
floor is excessively wet, check
the vehicle for leaks and that
the sealing strips are in a good
condition. If the sealing strips are
damaged, change them; refer to
Section 5.8.4.
