PowerBoss Admiral 38C Скачать руководство пользователя страница 7

Страница: 7 / 88

Admiral 38C Scrubber PB# 4100055UM Rev.* 08/10

Page 7

Safety Information

1.2

General information

• The Admiral 38C fulfills all the appli-

cable safety and health requirements

stipulated in the EU directives with

regard to its planning, constructional

design and final construction as intro-

duced by us onto the market. In the

case of modifications to the vehicle not

approved by us, the EC Declaration of

Conformity enclosed in this operating

manual loses its validity.

• In addition to the information provided

in this operating manual, all legally

applicable health and safety provisions

must be observed.

• Before starting up the vehicle for the

first time, read the operating manual

supplied with it thoroughly as well as

any separate manuals provided with

additional or attachment devices and

observe all the information during work.

• The vehicle may only be operated,

maintained and repaired by persons

trained by PowerBoss or authorized to

do so by PowerBoss.

• Particular attention should be paid to

the information regarding safety. Tech-

nical expertise is the key to preventing

errors when operating the equipment

and ensuring trouble-free operation.

• The operating manual must always be

kept at the operating location of the

vehicle and, as a result, should kept in

a safe place on the vehicle.

• If the equipment is sold or rented out,

these documents should be transferred

to the new owner/operator. The transfer

should be confirmed!

• The warning labels attached to the

equipment provide important informa-

tion concerning safe operation. Labels

which are illegible or missing must be

replaced.

• Original spare parts must be used to

ensure safety.

• If you want to shut the vehicle down,

render it inoperable. It must not repre-

sent a source of danger for children.

1.3

Operating information

• Before starting the vehicle up for

the first time, the battery to be used

must be fully charged, properly, by

implementing the initial battery charge

routine. Please pay attention to the op-

erating manual provided with the charg-

ing unit as well as the manual from

the battery manufacturer. PowerBoss

assumes no liability for damage to the

battery caused by a fault when the bat-

tery is charged for the first time.

• Before starting the vehicle up, always

check it is in a proper condition and

that it is safe to drive and operate.

Clear up any faults and defects im-

mediately! Never operate the vehicle

without functional safety equipment.

• Warning: Do not use the vehicle without

a protective roof structure (refer to “Ac-

cessories”, “Cab safety roof”) in areas

where the driver is at risk of being hit

by falling objects (e.g. warehouses).

Contact the trade association

respon-

sible for you as to whether obliga-

tions exist in this respect.

Содержание Admiral 38C
























































































Результаты поиска

Содержание Admiral 38C

Отзывы:

PowerBoss Admiral 38C, Руководство пользователя, Страница: 7 / 88

Результаты поиска

Содержание Admiral 38C

Отзывы: