PowerBoss Admiral 38C Скачать руководство пользователя

Страница: 11 / 88

Admiral 38C Scrubber PB# 4100055UM Rev.* 08/10

Page 11

Safety Information

• Ensure there are no naked flames

nearby when handling batteries, par-

ticularly when checking the acidity. Risk

of explosion!

• Do not inhale battery gases.
• Battery acid is very corrosive; keep

away from children.

• Wear protective goggles when control-

ling the acid level.

• In the event of acid splashing in the

eyes, rinse them with water for approx.

15 minutes and seek medical attention

immediately.

• Also pay attention to the information in

Section 1.4.

1.6

Environmental protection

• A certain factual expertise is required

in order to use substances which could

represent a risk to health and the envi-

ronment.

• Always observe legal regulations and

local directives when disposing of

cleaning agents.

• Used batteries with the recycling

symbol contain reusable commodities.

The heavy metals contained represent

a major risk both to people’s health

and to the environment. Never open or

damage batteries. Never touch, inhale

or swallow the content of batteries.

Health hazard! Do not allow batteries

to get into the environment. Risk of

contaminating the ground and water!

In accordance with the symbol with

the crossed out garbage bin, these

batteries must not be disposed of in

domestic waste. Return and recycling

of old batteries must be agreed on with

PowerBoss‘ authorized dealers.

• Dispose of the equipment in accor-

dance with local regulations. For further

information on handling and recycling,

please contact the authorized Power-

Boss dealer where you purchased the

equipment.

Содержание Admiral 38C
























































































Результаты поиска

Содержание Admiral 38C

Отзывы:

Похожие инструкции для Admiral 38C

Бренды по названию

Популярные бренды

PowerBoss Admiral 38C, Руководство пользователя

Результаты поиска

Содержание Admiral 38C

Отзывы:

Похожие инструкции для Admiral 38C

Бренды по названию

Популярные бренды