PowerBoss Admiral 38C Скачать руководство пользователя страница 61

Страница: 61 / 88

Admiral 38C Scrubber PB# 4100055UM Rev.* 08/10

Page 61

Maintenance and Service

Activity

Interval

Every 250 operating hours

Check the rotary brush head, repair as necessary (continued):
Check the spraying pattern of the nozzles, clean the nozzles if necessary
Check the drive belt seal for cleanliness and no leakage. To do this, clean any dirt and fluff from the

drive belt chamber, check the ventilation of the rotary brush motors in the belt chamber, clean as

necessary. Then always replace the seals
Check the parallel alignment of the holding attachment by inspecting the imprints of the brush and

power consumption, repair as necessary

Check the waste container and repair as necessary

Grease the joints and connecting rods on the rotary brush head

Check the functionality and correct adjustment (left and right) of the side brush; change as neces-

sary

Check the recovery tank, particularly the lid sealing quality and filter sieve

Change the O-rings in the draining hose and dosing valves

Check the suction hose is fitted properly and for signs of damage; clear any defects as necessary

Test the function of the squeegee: pivoting, raising/lowering, deflecting rollers

Check front and rear sealing lips of the squeegee; change as necessary

Check the knurled nuts on the squeegee; change as necessary

Grease the joints and connection rods of the waste water vacuuming system

Adjust the support wheels on the squeegee

Check the vacuum at the suction hose; clear any defects

Содержание Admiral 38C
























































































Результаты поиска

Содержание Admiral 38C

Отзывы:

PowerBoss Admiral 38C, Руководство пользователя, Страница: 61 / 88

Результаты поиска

Содержание Admiral 38C

Отзывы: