Poweramp LHP Series Скачать руководство пользователя страница 12

Страница: 12 / 52

4111-0012 — Sept. 2018

DO NOT grind or weld if hydraulic fluid or other

flammable liquid is present on the surface to be

ground or welded.

DO NOT grind or weld if uncontained hydraulic fluid

or other flammable liquid is present. Stray sparks

can ignite spills or leaks near the work area. Always

clean up the oil leaks and spills before proceeding

with grinding or welding.

Always keep a fire extinguisher of the proper type

nearby when grinding or welding.

DO NOT connect the dock leveler electrical wiring

and ground connections until all welding has been

completed.

DO NOT ground welding equipment to any hydraulic

or electrical components of the dock leveler. Always

ground welding equipment to the dock leveler frame,

NEVER to the platform.

Failure to follow these instructions may damage the

motor, hydraulics, wiring, and/or control panel.

Installation Precautions

DO NOT remove the shipping bands around the

dock leveler lip until instructed to do so.

Only trained installation professionals with the

proper equipment should install this product.

It is recommended and good safety practice to use

an additional means to support the dock platform

and lip anytime when physically working in front of

or under the dock leveler. This additional means

may include, but is not limited to a boom truck, fork

truck, stabilizing bar or equivalent.

Always post safety warnings and barricade the

work area at dock level and ground level to prevent

unauthorized use of the dock leveler before

installation is complete.

A hard hat or other applicable head protection

should always be worn when working under or

around a dock leveler.

Always stand clear of platform lip when working in

front of the dock leveler.

INSTALLATION

Содержание LHP Series





















































Результаты поиска

Содержание LHP Series

Отзывы:

Похожие инструкции для LHP Series

Бренды по названию

Популярные бренды

Poweramp LHP Series, Инструкция для владельца и пользователя

Результаты поиска

Содержание LHP Series

Отзывы:

Похожие инструкции для LHP Series

Бренды по названию

Популярные бренды