Power One AURORA PVI-6000-OUT-US-W, Инструкция по установке и эксплуатации

Страница: 53 / 77

User Manual Page 53 of 77
(PVI-6000-OUTD-US-W Rev.2.0)
ON : Light is always on
OFF : Light is always off
AUTO: Automatic light setting. It turns on every time a button is pressed and stays
on for 30 seconds then gradually turns off.
2)
Contrast
: display light contrast
Available display light tones from 0 to 9.
Press UP and DOWN to scroll through numbers and press ENTER to select.
3)
Buzzer:
key tone setting
Selecting:
ON : key tone is on
OFF : key tone is off
5.5.6.3 Service
Only installers and their staff can gain access to this function, which is password-
protected. The password can be provided by Power-One.
5.5.6.4 New password
This function is used to change the default password 0000.
To set your personal code, use the display keys as follows:
¾ Use ENTER to move from one digit to the next (from left to right)
¾ Use ESC to go back to the previous digit (from right to left)
¾ Press ESC repeatedly to go back to previous menus as described in 5.5.3
¾
Press DOWN to scroll numbers backwards (from 9 to 0)
¾ Press UP to scroll numbers from 0 to 9
5.5.6.5 Cash
This function helps quantifying energy savings.
Name: set desired currency, using keys as usual. Default currency is Euro.
Val/KWh: it indicates the cost of 1 KWh expressed in set currency. Default setting
is 0.50 Euro.
Name EUR
Val/KWh 00.50