Power One AURORA PVI-6000-OUT-US-W, Инструкция по установке и эксплуатации

Страница: 35 / 77

User Manual Page 35 of 77
(PVI-6000-OUTD-US-W Rev.2.0)
3. The red “GFI” (ground fault) LED indicates that inverter has detected a ground
fault in the wind turbine/rectifier system (DC side). When this kind of fault is
detected, the AURORA inverter immediately disconnects from the grid and the
corresponding fault message appears on the display. The inverter remains in
this condition until the operator presses the ESC button to re-start the grid
connection sequence. If the inverter does not reconnect to the grid after
pressing the ESC button, then call service to troubleshoot the system.
Fig.18 LED locations
Possible LED combinations and their meanings are listed below
KEY:
LED on
LED blinking
LED off
Any one of the above conditions
1 2 3
ESC
UP
DOWN
ENTER