Installation and operating manual
Page 63 of 95
(PVI-3.8/4.6-I-OUTD Rev.: 1.5)
5.5.5.2
Partial
By selecting Partial, you can access the following information:
Time: Total operation time since the count was last reset *
E-par: Total energy produced since the count was last reset*
Peak: Measured peak power value since the partial meter was activated
Val. : Economic gain since the count was last reset*
CO2: CO2 saving compared to fossil fuels since the count was last reset*
* Resetting all meters in this submenu can be done be keeping the ESC key depressed
(4
th
from display) for more than 3 seconds. After this time, a sound will repeat three
times.
5.5.5.3
Today
By selecting Today, you can access the following information:
E-tod: Total energy produced during the current day
Ppeak: peak power value reached during the day
Val. : Economic gain during the current day
CO
2:
CO2
saving for the current day compared to fossil fuels
Time
h
E-par
KWh
Ppeak W
Val. EUR
CO2 Kg
E-tod
KWh
Ppeak W
Val. EUR
CO2 Kg
