Potterton Gas condensing boiler, Инструкция по установке, эксплуатации и обслуживанию, Страница: 43 / 136

5. Select the required menu point with the control knob.
Menu point Menu point
- Time and date - Primary contr/system pump
- Operator section - Boiler
- Wireless - Cascade
- Time prog heating circuit 1 - Solar
- Time prog heating circuit 2 - Solid fuel boiler
- Time program 3/HC3 - Buffer
- Time program 4 / DHW - DHW storage tank
- Time program 5
- Holidays heating circuit 1 - Configuration
- Holidays heating circuit 2 - LPB-system
- Holidays heating circuit 3 - Fault
- Heating circuit 1 - Service/special operation
- Heating circuit 2 - Input/output test
- Heating circuit 3 - State
- DHW - Diagnostics cascade
- Consumer circuit 1 - Diagnostics heat generation
- Consumer circuit 2 - Diagnostics consumers
- Swimming pool circuit - Burner control
- Swimming pool
Note: Not all menu points are visible, depending on the selection of setting level
and programming!
8.2 Modification of parameters
Settings, which are not directly modified via the front panel, have to be carried out
in the setting level.
The basic programming processs is depicted in the following by the setting of
time
and date .
1.
Press OK button
Note : If parameters which are not mentioned in the level below are subject to
change consider section 8.1 (Page 42) !
Programming
396532 05.11 Paramount three 30-115 kW 43