PostProcess Technologies, Inc. • www.postprocess.com • REV A | page 6
Warnings, Cautions and Notes
• Do not operate the unit without proper grounding.
•
Do not allow alcohol, gasoline or other flammable solutions near the machine. Doing so could
cause a fire or explosion.
• Do not attempt to disassemble or repair the machine.
• Do not place the power cord in a location where it may come into contact with water or liquids.
• Connect the unit only to three-phase 400v power 50Hz.
• Use only
PostProcess
detergents. Do not add any other liquid solutions to the machine.
•
Do not operate the machine without sufficient detergent in the tank.
• Do not touch the detergent with bare skin. Use nitrile gloves, laboratory-style
eyeglasses and other necessary personal protective equipment when performing
any operations including removing parts where skin could come into contact with
the detergent.
• When working with or near detergents, always wear nitrile gloves.
• Wear laboratory-style protective glasses.
• If bare skin comes in contact with detergent, thoroughly wash the body part with
soap and warm, clean water.
• It is recommended that an eyewash station is near the DECI and any detergent
storage areas.
Caution should be used whenever working with industrial-powered equipment.
If there is an emergency situation, it is important to note that hitting the
EMERGENCY STOP
button does not turn off power to the DECI. It turns off the
DECI’s operating cycle only. To shut off power to the DECI, turn off the
MASTER
POWER SWITCH
, located on the left-side panel of the DECI.
Electrical Safety
Residual Risks
Foreseeable Misuse
The
EMERGENCY STOP
button should only be used in actual emergency situations. For any other
situation requiring the machine to be powered down, use the
MASTER POWER SWITCH.
NOTE
The operating environmental temperature must be between 10°C and 40°C (50°F to 104 °F), and humidity
between 20% and 80% relative humidity, non-condensing.
Environmental Temperature and Humidity
