PostProcess Technologies, Inc. • www.postprocess.com • REV A | page 45
The next configuration screen allows for the setting of the different spray configuration’s expected pressures.
The button allows for the current pressure read by the system to be copied for the valve configuration shown.
The next configuration screen contains settings for the valve warnings and number of concurrent spray
valves allowed.
The
Valve Pressure Warning Tolerance
setting configures the tolerance around the pressures set on the
previous configuration screen. When an auto cycle is active if the pressure for a certain valve configuration is
greater than or less than the pressure set for it plus or minus the tolerance then either a low or high pressure
warning will become active.
The
Concurrent Spray Valve Limit
is used to set how many valves are allowed to be opened at the same time.
6. Appendix A
