Porsche 911 Turbo 2014, Руководство пользователя

Страница: 268 / 300

266
Minor Repairs
A
- Filler bottle
B - Filler hose
C - Filler hose plug
D
- Valve turner
E - Valve insert
F - Tire valve
Filling in sealant
1.
Leave the object that caused the puncture in
the tire.
2. Remove sealant and the enclosed sticker from
the luggage compartment.
3.
Stick the sticker in the driver’s field of vision.
4. Shake filler bottle A .
5. Screw filler hose B onto the filler bottle.
The filler bottle is now open.
6. Unscrew valve cap from the tire valve F .
7. Remove valve insert E from the tire valve with
valve turner D .
Keep the valve insert in a clean, dry place.
8.
Remove plug
C
from the filler hose
B
.
9. Push filler hose onto the tire valve.
10. Hold the filler bottle higher than the level of the
tire valve and squeeze it forcefully until the
bottle is completely emptied into the tire.
11. Pull filler hose off the tire valve.
12. Screw valve insert E securely into the tire
valve with the valve turner D .
13. Connect the compressor to a socket in the
vehicle and inflate the tire to at least 37 psi/
2.5 bar/25 kPa.
If this tire pressure cannot be reached, the tire
is too severely damaged.
Do not continue driving with this tire.
14. Screw valve cap onto the tire valve F .
15. Check the tire pressure after driving for
around 10 minutes.
If the tire pressure is less than 22 psi/1.5 bar/
15 kPa, do not continue driving.
If a value of more than 22 psi/1.5 bar/15 kPa
is indicated, correct the pressure to the
prescribed value.
f
Please see the chapter “TIRE PRESSURE FOR
COLD TIRES (68 °F/ 20 °C)” on page 287.
16. Please contact an authorized Porsche dealer.
f
Also follow the separate operating instructions
for the tire sealing compound.
A tire pressure sensor that is soiled with sealant
cannot determine the tire pressure correctly.
f
When the defective tire is replaced, the tire
pressure sensor must be replaced.
Damaged tires could burst causing loss of control
of the vehicle.
f
Have the tire replaced by a specialist
workshop as soon as possible.
f
Avoid hard acceleration and high cornering
speeds.
f
Observe maximum speed of 50 mph
(80 km/h).
f
Always observe the safety and operating
instructions, which can be found in the
separate operating instructions for the sealant
and on the compressor.
Pressure Loss
Damaged Tires
WARNING h
DANGER h
14_991_Turbo_21.book Seite 266 Mittwoch, 9. April 2014 2:19 14