Porsche 911 Turbo 2014, Руководство пользователя

Страница: 238 / 300

236
Maintenance and Car Care
If cleaning agents (e.g. wheel cleaning agents)
come into contact with the brake disks, the
resulting film on the brake disks can impair
braking performance.
f
Make sure that no cleaning agent comes into
contact with the brake disks.
f
If cleaning agent has come into contact with
the brake disks, clean the brake disks
thoroughly with a strong jet of water.
f
Paying attention to any road users behind you,
dry the brake disks by applying the brakes.
Stainless steel tailpipes
Stainless steel tailpipes can discolor due to
soiling, strong heat and combustion residues.
The original shine can be achieved again using
commercially available metal luster paste or
metal polish.
Cleaning door, roof, lid and window seals
The lubricant coating on the inner door seals may
be damaged by unsuitable cleaning and care
agents.
f
Do not use any chemical cleaning agents or
solvents.
f
Do not use any preservative agents.
f
Wash dirt (e.g. abrasion, dust, road salts) from
all seals regularly using warm soapy water.
f
If there is a risk of frost, protect the outer door
seals and the lid and flap seals against freezing
into place with a suitable care product.
Leather care
The natural surface markings of leather,
e.g. creases, healed scars, insect sting marks,
structural differences and slight variations in
shade and grain add to the attractiveness of the
high-quality natural leather product.
Observe the following care instructions:
The leather will be damaged by the use of
unsuitable cleaning and care agents and by
inappropriate treatment.
f
Do not use caustic cleaners or hard cleaning
objects!
f
Make sure that perforated leather does not get
wet on its reverse side.
f
Remove water drops from the leather without
delay.
f
Clean all types of leather regularly to remove
fine dust using a soft, damp, white woolen
cloth or a commercially available microfiber
cloth.
f
Remove heavy contamination (not water or
moisture stains) with a leather cleaner.
Always read the instructions for use given on
the containers.
We recommend Porsche leather care liquid.
f
Treat cleaned leather only with a leather care
product.
We recommend Porsche leather care liquid.
Seats with seat ventilation
Care instructions for water or moisture
stains.
Rain water or moisture can stain the perforated
leather.
Removing water and moisture stains
Preconditions:
– Seat heating and seat ventilation must be
switched off.
– No direct sunlight.
– Do not use leather cleaners or care products
to remove water and moisture stains.
f
Blot the entire seat or backrest surface using
a clean, absorbent sponge and distilled water.
Make sure that the perforated leather does not
get wet on its reverse side.
f
Allow the seat covering to dry completely at
room temperature out of direct sunlight.
Do not dry the seat covering by switching on
the seat heating and seat ventilation.
f
Once dry, wipe the seat covering with a dry,
lint-free cloth.
Cleaning carpet, floor mats
f
Use a vacuum cleaner or a brush (not too soft)
for cleaning.
f
Heavy dirt and stains can be removed with
a stain remover.
We recommend Porsche stain remover.
To protect carpets, the Porsche range of
accessories includes mats of the correct size and
with the appropriate fastening.
Cleaning Agents on
Brake Disks
WARNING
h
NOTICE
NOTICE
14_991_Turbo_21.book Seite 236 Mittwoch, 9. April 2014 2:19 14