Porsche 911 Turbo 2014, Руководство пользователя

Страница: 152 / 300

150
Driving and Driving Safety
Information
The engine will start automatically in certain
situations, e.g. if the vehicle starts rolling, if air
conditioning causes reduced comfort, or if the
brake vacuum is reduced.
The engine is stopped again automatically if the
preconditions for stopping the engine
automatically are then met again.
Exceptions for the Auto Start Stop
function
The Auto Start Stop function is deactivated e.g.:
– When Sport mode is activated.
– When PSM is off.
– In maneuvering mode.
– When A/C MAX mode is activated.
– When the “Windshield defrost” function is
active.
– At altitudes above approx. 9,843 ft.
(3,000 meters)
For information on switching on and off the Auto
Start Stop function:
f
Please see the chapter “SWITCHING AUTO
START STOP FUNCTION AND COASTING
MODE ON AND OFF” on page 150.
The Auto Start Stop function is available
with
limited functionality
in the following situations,
e.g.:
– If the air conditioning or passenger
compartment heating is operated at a high
setting or if the defrost function is run for long
time periods.
– If the battery charging condition is low.
– On upward or downward slopes.
– During internal vehicle test procedures,
e.g. automatic engine checks.
Information
If one of these situations arises after the engine
has stopped automatically, the engine can be
restarted automatically.
Reaction after leaving the vehicle
(selector-lever position D or N selected)
If the vehicle is left after an automatic stop when
PDK selector-lever position D or N is engaged, an
automatic engine start is executed to remind the
driver that the Auto Start Stop function is still
active.
In selector-lever position
D
, the electric parking
brake is additionally engaged.
The brake warning light on the instrument panel
and the indicator light on the switch light up.
f
Please see the chapter “OVERVIEW OF
WARNING AND INFORMATION MESSAGES”
on page 129.
Reaction after leaving the vehicle
(selector-lever position P selected)
If the vehicle is left after an automatic stop when
PDK selector-lever position
P
is engaged, in order
to open the garage door, for example,
no automatic engine start is executed.
Auto Start Stop mode is resumed if the driver
closes the driver’s door and presses the brake
within 30 seconds of leaving the vehicle.
If one of these requirements is not met, the engine
has to be started
manually
. The
message “ Please start engine manually ” will
appear on the multi-function display in the
instrument panel.
f
Please see the chapter “OVERVIEW OF
WARNING AND INFORMATION MESSAGES”
on page 129.
Switching Auto Start Stop function and
coasting mode on and off
Switching off
f
Press button .
The indicator light on the button lights up.
Automatic stopping of the engine is
suppressed and gliding mode is switched off.
Switching on
f
Press button .
The indicator light on the button goes out.
The engine is automatically stopped when the
vehicle stops and gliding mode is switched on.
f
Please see the chapter “DRIVING IN COASTING
MODE” on page 174.
14_991_Turbo_21.book Seite 150 Mittwoch, 9. April 2014 2:19 14