156
Driving and Driving Safety
If the current traffic situation does not allow you to
drive safely at a constant speed and with sufficient
distance to the vehicle in front, using the cruise
control can cause accidents.
f
Do not use the cruise control in heavy traffic,
in city traffic, on twisting roads or under
unfavorable road conditions (e.g. wintry or wet
conditions, varying road surfaces).
f
Observe all local and national speed limits.
f
Do not reach through the steering-wheel
spokes while driving.
Switching cruise control readiness on
f
Press button
A
on the control stalk.
Maintaining and storing speed
1.
Accelerate or decelerate to the desired speed
using the accelerator pedal.
2.
Push the control stalk on the steering wheel
forward (position
1
).
The current driving speed is now stored as the
desired speed, which will be maintained
automatically.
Accelerating (e.g. to overtake)
Variant 1
f
Increase the speed as usual with the
accelerator pedal.
When you ease off the accelerator, the
previously stored value is set again.
Variant 2
f
Push the control stalk on the steering wheel
forward (position
1
).
The desired speed is increased in steps of
1 mph (1 km/h).
or
Press the control stalk on the steering wheel
forward and keep it pressed (position
1
).
The desired speed is increased in steps of
5 mph (10 km/h).
The new desired speed is displayed on the multi-
function display in the instrument panel.
Decelerating
f
Briefly pull the control stalk on the steering
wheel towards the steering wheel (position
2
).
The desired speed is decreased in steps of
1 mph (1 km/h).
or
Pull the control stalk on the steering wheel
towards the steering wheel and keep it pulled
(position
2
).
The desired speed is decreased in steps of
5 mph (10 km/h).
The new desired speed is displayed on the multi-
function display in the instrument panel.
Downshifts are carried out to help maintain the
pre-selected speed (especially when driving
downhill).
Interrupting cruise control
operation – OFF
The speed driven before the interruption remains
stored in the memory and can be reactivated by
pressing the control stalk.
f
Please see the chapter “RESUMING THE
STORED SPEED – RESUME” on page 157.
f
Press the control stalk down (position
3
).
or
Operate brake pedal
or
move PDK selector
lever to
N
position.
Cruise control operation is interrupted
automatically:
– If the set vehicle speed is exceeded by more
than approx. 16 mph (25 km/h) for longer
than 20 seconds.
– If Porsche Stability Management (PSM)
intervenes for longer than 0.5 seconds.
Misuse of Cruise Control
Cruise control readiness
The grey symbol on the multi-function
display in the instrument panel indicates
readiness.
Desired speed
The desired speed that was stored is
displayed under the cruise control
symbol, which has now turned orange.
WARNING
h
14_991_Turbo_21.book Seite 156 Mittwoch, 9. April 2014 2:19 14
Содержание 911 Turbo 2014
Страница 1: ...911 Turbo Owner s Manual...
