Porsche 911 GT3 R 2012, Техническое руководство

Страница: 150 / 163

147
System errors can be caused by either a malfunction of the acceleration /
yaw sensor or a failure of one of the wheel speed sensors.
The breakdown of a wheel speed sensor leads to the deactivating
of the ABS.
In case a wheel speed sensor is disconnect and the ABS is active. The
ABS error gets active. When the sensor is connected and works properly
the error message disappears when a ground speed of 20 kmph is
achieved.
To communicate with the ABS’ ECU a special cable is necessary (see
parts catalog).
Zur Kommunikation mit dem ABS Steuergerät ist ein zusätzliches Kabel
notwendig (siehe Teilekatalog).
10.11.7.1. Checking the error memory
• Connect ABS cable, turn on ignition, start XMIT
•
When using XMIT for the first time one has to select the file
Xmite_Motorsport.dat in the field FS-map
• Click on read heart
• Click on „Conn-1 read“
• Click on “EEPROM”

error memory is being read
• Possible errors are shown in the display on the right
• In case there are errors stored

fix them
1 2 3