User’s Guide for the Polycom PowerCam Presenter
2 - 16
To use a camera preset:
¾
Press
Preset 1
or
Preset 2
on the remote control to move the
camera to the position you stored for that preset.
If automatic camera tracking is on, it will turn off when you press
Preset 1
or
Preset 2
.
Obtaining System Information
The System Information screen provides you with specific details about your
Polycom PowerCam Presenter.
To obtain system information:
1.
Press
Menu
on the remote control.
2.
Select the
System
button at the bottom of the screen.
The System Information screen lists:
—
System name
—
Model
—
Serial number
—
IP address
—
Software version
—
MAC address
—
Boot UI version
—
Remote control battery weak indicator (if the battery is weak)
Tips on Using the Polycom PowerCam Presenter
Follow these tips to get the best results when using PowerCam Presenter:
•
Do not use the locator pack when the batteries are weak. The System
Information screen shows a remote control battery weak indicator if the
batteries are weak. For information on how to recharge the batteries, refer
to
Charging the Locator Pack Batteries
on page
3-1
.
