Polaris SLINGSHOT GRAND TOURING 2019 Скачать руководство пользователя | Manualshive

Страница: 132 / 147

background image

IN THE COUNTRY WHERE YOUR PRODUCT WAS
PURCHASED:

Warranty or service bulletin repairs must be done by an authorized POLARIS
dealer. If you move or are traveling within the country where your product was
purchased, warranty and service bulletin repairs may be requested from any
authorized POLARIS dealer that sells the same line as your product.

OUTSIDE THE COUNTRY WHERE YOUR PRODUCT WAS
PURCHASED:

If you are traveling temporarily outside the country where your product was
purchased, you should take your product to an authorized POLARIS dealer. You
must show the dealer photo identification from the country of the selling dealer’s
authorized location as proof of residence. Upon residence verification, the
servicing dealer will be authorized to perform the warranty repair.

IF YOU MOVE:

If you move to another country, be sure to contact POLARIS Customer
Assistance and the customs department of the destination country before you
move. Product importation rules vary considerably from country to country. You
may be required to present documentation of your move to POLARIS in order to
continue your warranty coverage. You may also be required to obtain
documentation from POLARIS in order to register your product in your new
country. You should warranty register your product at a local POLARIS dealer in
your new country immediately after you move to continue your warranty
coverage and to ensure that you receive information and notices regarding your
vehicle.

IF YOU PURCHASE FROM A PRIVATE PARTY:

If you purchase a POLARIS product from a private party, to be kept and used
outside of the country in which the product was originally purchased, all warranty
coverage will be denied. You must nonetheless register your product under your
name and address with a local POLARIS dealer in your country to ensure that
you receive safety information and notices regarding your product.

EXPORTED PRODUCTS

EXCEPT WHERE SPECIFICALLY REQUIRED BY LAW, THERE IS NO
WARRANTY OR SERVICE BULLETIN COVERAGE ON THIS VEHICLE IF IT IS
SOLD OUTSIDE THE COUNTRY OF THE SELLING DEALER’S AUTHORIZED
LOCATION. This policy does not apply to vehicles that have received
authorization for export from POLARIS. Dealers may not give authorization for
export. You should consult an authorized dealer to determine this vehicle’s
warranty or service coverage if you have any questions. This policy does not
apply to vehicles registered to government officials or military personnel on
assignment outside the country of the selling dealer’s authorized location. This
policy does not apply to Safety Bulletins.

130

Downloaded from

«
...
130
131
132
133
134
...
»

Содержание SLINGSHOT GRAND TOURING 2019




















































































































































Отзывы:

Нет отзывов

Похожие инструкции для SLINGSHOT GRAND TOURING 2019

Бренд: Eclipse Страницы: 6

Бренд: RaceChip Страницы: 20

Бренд: Fabbri Страницы: 4

iBoard IB-ZK406

Бренд: APS Auto Parts Specialist Страницы: 3

Бренд: Xblitz Страницы: 30

Бренд: CALIMA Страницы: 9

Бренд: TATA Motors Страницы: 92

Бренд: Volvo Страницы: 266

Бренд: Audiovox Страницы: 3

Бренд: Victory 4x4 Страницы: 9

Бренд: INDIWORK Страницы: 18

Бренд: Opel Страницы: 103

Бренд: Anker Technology Страницы: 8

PRIME DESIGN VCR-TC11B

Бренд: Safe Fleet Страницы: 12

Бренд: Honda Страницы: 268

Бренд: Hama Страницы: 13

Бренд: MiX Telematics Страницы: 39

Бренд: EUFAB Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды