Polaris A09BA50FA, Руководство пользователя

Страница: 50 / 256

MAINTENANCE
2.40
WHEEL INSTALLATION
1. With the transmission in gear and the parking
brake locked, place the wheel in the correct
position on the wheel hub. Be sure the valve stem
is toward the outside and rotation arrows on the
tire point toward forward rotation.
2. Attach the wheel nuts and finger tighten them.
3. Lower the vehicle to the ground.
4. Securely tighten the wheel nuts to the proper
torque listed in the table above.
CAUTION:
If wheels are improperly installed it could affect
vehicle handling and tire wear.
On vehicles with
tapered rear wheel nuts, make sure tapered end of nut
goes into taper on wheel.
TIRE PRESSURE
Tire Pressure Inspection (PSI - Cold)
Front Rear
4 3
TIRE INSPECTION
CAUTION:
G
Maintain proper tire pressure. Refer
to the warning tire pressure decal
applied to the vehicle.
G
Improper tire inflation may affect ATV
maneuverability.
G When replacing a tire always use
original equipment size and type.
G The use of non-standard size or type
tires may affect ATV handling.
Tire Tread Depth
Always replace tires when tread depth is worn to
1/8
″
(3 mm) or less.
Tread
Depth 1/8 I (3 mm)
WARNING
Operating an ATV with worn tires will increase
the possibility of the vehicle skidding and pos-
sible loss of control.
Worn tires can cause an accident.
Always replace tires when the tread depth
measures 1/8
″
(.3 cm) or less.
FRAME, NUTS, BOLTS,
FASTENERS
Periodically inspect the tightness of all fasteners in
accordance with the maintenance schedule. Check
that all cotter pins are in place.
Refer to specific
fastener torques listed in each chapter.