Polargos EASY WAY201, Руководство пользователя

Страница: 15 / 40

15
GB
A
B
V1
Choose one hole (of three)
that does not interfere with
a rail and drill the gate
crossbar
M6 x 40 mm
I
1
Automatic system installation
8
Put the automatic system onto the suitably attached connectors.
9
Check the position of the connector on the gate once again and adjust it if necessary.
10
Remove the automatic system.
Choose one hole in the connector that does not interfere with a rail.
In its position, drill the gate crossbar with a drill 6.5 . Then ream the hole with
a drill 7.5 from the street side.
Fit the locking screw M6 x 40 mm.
7,5
6,5