Installation Instructions
& Owner’s Manual
Orca™ GarageAce Remote Control Roller
Door Opener.
IMPORTANT
SAFETY
INSTRUCTIONS
Warning:
It is vital for the
safety of
persons to
follow all
instructions.
Incorrect
installation can
lead to severe
injury.
Save these
instructions.
NOTE: This unit is for roller doors only. See your local distributor
for ORCA tm GarageAce Door Openers designed for tilt and
sectional doors.
Thank you for purchasing the ORCA™ GarageAce. This unit
is easy to install and provided these instructions are followed,
will provide many years of smooth, trouble-free operation.
Important Information
Never let children operate or play with the door controls.
Keep the remote control away from children.
Always keep the moving door in sight - and keep people and
objects away until the door is completely closed.
NO ONE SHOULD CROSS A MOVING DOOR.
Do not operate the door opener manually with people or any
object (including motor vehicles) within the doorway.
The garage door must be well balanced. Sticking or binding
doors can falsely trigger the obstruction detection.
All maintenance must be carried out by a suitably qualified
person.
Test the door opener monthly. The garage door MUST reverse
on contact with a 5 to 10 cm high object on the floor. The
amount of force the door exerts is adjustable, and failure to
adjust the opener properly may cause severe injury or death.
Although GarageAce has an obstruction detector, it is a legal
requirement in some countries that a photo-electric sensor
be installed across the doorway. Please check this requirement
with your local distributor.
Read all instructions carefully.
SEE BACK OF LEAFLET FOR FEATURES, CONTROL
DEFINITIONS AND SPECIFICATIONS.
Contents
1 x Drive Unit
1 x Control Unit
1 x U Bolt and nuts
2 x Remote Controls
Cat. OGA-GDRD
