6
2
3
1
4
8
7
9
12
10
5
11
Tools required:
• 1/8” allen wrench (included)
• Power drill and set of drill bits
• Flat blade screwdriver (potentiometer & terminal size)
• Center punch
• Screwdriver (Phillips size 2)
• Wire stripper
• Tape ruler
• #7 drill 1/4-20 tap (metal frame install)
•
servicing or cleaning.
•
To reduce the risk of injury or person, use the operator only with
Pedestrian Swing doors.
•
This operator is for indoor use only.
Always disconnect the main power to the operator prior to
•
circuit from the main circuit breaker panel and must NOT be
connected into any building lighting system that operates
flourescent lights.
•
Maximum door size: 48 in (1219mm) wide x 250 lb (113.4kg).
120VAC power supplied to the operator must be a dedicated
WARNINGS
!
®
5700
LEO
Power Operator
Installation and Instruction Manual
Series
ASSA ABLOY
80-9357-0008-020 (Rev 3)
Item No.
Description
1 Back plate
2 Door Closer (1601LAP or 1601BFLAP)
3 Motor Assembly (5700M)
4 Inverter (5700IN)
5 Cover (5700CVR)
6 On/Off switch
7 Circuit Breaker
8 120VAC Electrical Connections
9 Activation Inputs
10 Door Open/Closed Position Magnets
11 Optional RF Receiver
12 Power Supply - 1.1A 24V
Norton® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company.
Copyright © 2015 Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
80-9357-0008-020 (Rev 3)
