Polargos EASY WAY201, Руководство пользователя

Страница: 24 / 40

24
GB
ON/OFF
AUTO
PROG
ON/OFF
AUTO
PROG
3
Parameter setting
Checking of the correctness of settings
1. Press long the remote control push-button.
2. Press the push-button once again to stop the 2 leaves midway.
3. Disconnect the power supply for at least 5 seconds.
4. Reconnect the power supply.
5. Press long the remote control push-button once again.
The leaves MUST move in the opening direction.
If the gate does not open correctly:
• The leaf activated as the first one (controlled by M1) moves in the closing direction
> Interchange cables in drive M1.
• The leaf activated as the second one (controlled by M2) moves in the closing
direction
> Interchange cables in drive M2.
Once the cables of one or two drive units are interchanged, restart the procedure of teaching
of the movement path of leaves.
To this end, restart programming of the remote control (see page 22).
Automatic mode adjustment.
Precautions
To ensure the gate operation in automatic mode according
to EN 12 453, it is necessary to install the following accessories
that are available for the drive unit EASY WAY 201:
● photocell set (description and cables, see page 29),
● orange light (description and cables, see page 30),
● gate zone lighting.
In the case of solar energy supply, see page 35.
Automatic mode
After opening, the gate closes automatically after
a preset time. The automatic mode will be active once
the photocell cables are connected and the following
adjustment is carried out:
1. Put the remote control in the place indicated
on the housing.
> Indicator AUTO is off.
2. Press long (> 5 s) the remote control
push-button and hold it down until the indicator
AUTO lights up. Release the push-button.
> Indicator AUTO is flashing.