Polargos EASY WAY201, Руководство пользователя

Страница: 29 / 40

29
GB
RX TX
1 2
1 2 3 5
2 8 m
25 cm
max. 20 cm
Accessories – Description and connections
Photocells
Photocells cause the gates to stop or reverse their motion in the case of obstacle detection.
Installing a set of photocells is possible. Each photocell set consists of:
● A transmitting photocell (TX),
● A receiving photocell (RX).
Location of photocells
To facilitate the installation of conductors, locate
the receiving photocell on the post where the
drive unit equipped with the electronic system is placed.
Before the connection of photocells, remove the conductor (jumper)
that is installed between the electronic module terminals 3 and 4.
Wiring diagram for the photocell set
In case of a solar energy supply, see page 35.
To ensure better operation of the photocells, fit them
with a shield.
Safety rule
Photocell operation must be inspected every 6 months. To this end, cover the photocell
with one hand during the closing of the gate. Closing should be interrupted.