Point Six Link Manager 4010-43, Руководство пользователя

Страница: 35 / 131

Link Manager Manual Link Manager Advanced Functions

33
warn n – is the I/O point in a “state of concern” (T/F)
value n – value of the I/O point
unit n – engineering units label of the I/O point
Example
na,2Humid_Temp,2,D40000000B1FBD28,F,F,F,45,%RH,T,71.6,F
Remarks:
warn , value and unit are repeated for every I/O point of the sensor. For the actual
data fields, consult the specification for the transmitter being used.
To place the Link Manager in Pass-Thru mode with engineering unit conversion,
send the “UE” command on the media you wished to receive packets.
For the media in Pass-Thru mode, the Link Manager does not apply the Inactivity
Timeout.
Link Manager can passively wait to be placed in Pass-Thru mode or actively push a
connection and then go into Pass-Thru mode. Link Manager has a Pass-Thru Media
Callout Table that it uses to place and maintain a connection with the Link Manager
in Pass-Thru mode. The “CUS”, “CUX”, “CUE”, “CUR” and “CUC” commands
are used to set and maintain the Pass-Thru Media Callout Table. You specify the
media to push, the type of Pass-Thru mode and how aggressively to retry the
connection if the connection is disrupted.
UDP Pass-Thru
Using UDP Pass-Thru
UDP Pass-Thru to Host