Point Six Link Manager 4010-43, Руководство пользователя, Страница: 110 / 131

108

Commands Link Manager Manual
‘S’ - Get Status Data Command
Command Options S
Command/Response Syntax
Command: S
Response: S, sensor count , last setup change time, alarm time , periodic time,
job count, output count, timer count, match count, scheduled output count
Parameters Where:
sensor count – number of sensors in the sensor list
last setup change time
– time and date of the last setup change
( mmddyyhhnnss)
alarm time – na – Not used by the Link Manager.
periodic timer – na – Not used by the Link Manager.
job count
– number of jobs in the job list. Not used by the Link Manager.
output count
– number of outputs in the output table. Not used by the Link
Manager.
timer count
– number of timer outputs in the timer table. Not used by the
Link Manager.
match count – number of matches in the match table. Not used by the Link
Manager.
scheduled output count – number of schedule outputs. Not used by the Link
Manager.
failed
– resetting the periodic alarm time failed: “,F”; blank if succeeded.
Not used by the Link Manager.
Login Level
Login Level: Data
Description
Returns the number of sensors in the configuration table.
The last setup change time can be used by host to determine if the setup has been
changed by a second host.
Examples
Command: S
Response: S,6,082503153753,na,na,0,22,0,6,2
Remarks: 6 sensors are set up; last setup change occurred at 08/25/03
15:37:53.