How to Create and Change an Authorized User’s Account
1. Name the camera in “Camera Name” section.
2. Create a “General User” by defining username and password. Old Password is required
for changing an existing general user’s account.
3. To change the Administrator’s password, just enter your current Username and Old
Password, and then define your New Password by typing twice in respective sections.
4. Click “Submit” to apply the changes you have made. Or click “Cancel” to abort the setting.
Attention
The lengths of the Username and Password should be between 3
and 16 characters, and the Password will always show as
encrypted 7 characters.
EventTrigger
1. Check option(s) in “Event” section.
Information
•
When “Motion Detection 1 Sensitivity” is selected, a red square
frame appears within the viewer.
•
When “Motion Detection 2 Sensitivity” is selected, a green square
frame appears within the viewer.
•
If you have connected any external sensor or device to the
network camera, “GPIO DI 1” and/or “GPIO DI 1” enables the
network camera to send alarm signal to the external sensor or
device. Please refer to “
External I/O Interface
” section.
31
