1. Insert the RJ-45 connector into the Ethernet port of the network camera.
2. Connect the Ethernet cable to the hub’s port.
3. Connect the AC adapter to the DC IN Jack of the network camera.
4. Plug the AC adapter into a standard wall outlet.
5. If the LED indicator keeps flashing, your network camera is successfully connected.
Information
•
For more information about connection to organization network,
please refer to
Use the Network Camera from Dynamic Domain
Name System
.
•
If you are to use the network camera in a corporation
environment, you may need to consult your network administrator
or ISP.
•
For more information about the LED indicator, please refer to
“
LED indicator
” section.
Method III. Connect Directly to the Internet
If you are to connect your network camera to Internet via Cable Modem or xDSL, please
follow the steps:
11
