3. Tighten the screws when you complete the lens tilt angle adjustment.
4. Load the specially designed lens focus adjusting fixture onto the base and adjust the lens
focus manually if necessary.
Information
If you adjust the lens focus without the lens focus adjustment fixture,
when you reload the lens cover, you will get blurred images due to
the refrangibility of the lens cover. To eliminate the effect of
refrangibility on the images, you are recommended to use the fixture
to adjust the lens focus manually.
5. Unload the fixture after completing the lens focus adjustment.
6. Reload the lens cover by inserting the tab on the bottom of the lens cover into the sliding
groove and rotate clockwise all the way to the end of the sliding rail. Note that the
position of the lens window should be aligned with the lens.
13
