Mounting to Suspended Ceiling
1. Remove one piece of ceiling panels you are to mount the network camera.
Attention
Please consult your decorating expert for more help when
removing and installing the ceiling panel.
2. Place the mounting plate on the inner side of the panel and mark down the holes you are
to drill. Set A holes are for mounting the network camera with mounting bracket, and Set
B holes are for mounting without mounting bracket.
3. Drill Set A or Set B holes and a larger hole on the panel. The larger hole is for passing
through the cables.
4. Place the mounting plate onto the inner side of the panel.
5. Pass the Ethernet cable and power cord through the lager hole and insert them
respectively into the interfaces on the network camera.
6. Press the bottom of the network camera close to ceiling panel, and fasten the network
camera with screws from the mounting plate as indicated in Figure B. If you choose to
mount the network camera with mounting bracket, please jump to step 7.
7. Press the mounting bracket to the ceiling panel and fix with screws as indicated in the
Figure A.
8. Install the panel with mounted network camera to the position on the ceiling.
9
