Plockmatic MPS XL, Руководство по эксплуатации

Страница: 19 / 44

19
2
Status LED
Status LED
The status LED indicates the status of the
Stacker.
• RED: Jam/Fault
• RED Blinking: Multiple Fault Codes
• GREEN: Ready
• BLUE: Running
• BLUE BLINKING: Running - Paused
• PURPLE: Showing version/Counter/
Calibrating.
• OFF: Powered down/Undocked
Sheet counter
Sheet counter
The sheet counter is a total count of sheets
that have run through the Stacker, not a
count of the job. The Stacker sheet counter
has no connection to the print engine usage
counters.
The sheet counter is displayed through the
LEDs.
1. Switch the Stacker on.
2. Set the Fan Adjustor to illuminate 2 dark
blue Indicator LEDs.
3. Press and hold the Pause/Resume But-
ton until the light turns purple (approxi-
mately 5 seconds), then release it.
4. The LEDs have a value associated to
them as shown on the left. They will blink
light blue to show the sheet count.
To understand what the sheet count is, the
operator will have to count the blinks and
sum the values of the LED(s).
See examples on following page.
Status Light
Indicator LEDs
Fan
Adjustor
Ten Thousands
Thousands
Hundred Thousands
Millions
Ten Millions
Continued on next page...