Plockmatic MPS XL, Руководство по эксплуатации

Страница: 26 / 44

26
3
The Long Sheet Guide and Long Sheet End Stop positions have to be adjusted according
to the paper dimensions.
Paper Length ≥715 mm / ≥28.1’’
For paper longer than 715 mm / 28.1’’, fold the Sheet Guide Support down and pull out the
Stacker Table to the correct length: +3mm to 5mm (+0.12’’ to 0.20’’) from the edge of the
paper. Use the Long Sheet Guide and Long Sheet End Stop.
1. Remove Paper Support (Section 1 - Setting the Paper Support) & Sheet Guide (if
installed).
Setting Long Sheet Guide & Long Sheet End Stop
Continued on next page...
Sheet Guide
2. Loosen End Stop Adjustment Knobs (2x) (one on each side) and Move Sheet Guide
Supports together to the longest position.
End Stop Adjustment Knobs