Plockmatic MPS XL, Руководство по эксплуатации

Страница: 5 / 44

NOTE:
• The indications like front and rear, left and right refer to the paper transport direction.
• The operator manual always has to be available at the place of use of the machine.
• In the interest of technical development the company reserves the right to make
alterations to specifications without prior notice!
CAUTION:
• The machine and its peripherals must be installed and maintained by a customer service
representative who has completed the training course on those models.
• Always follow all warnings marked on, or supplied with, the equipment.
• When you disconnect the power plug from the wall outlet, always pull the plug (not the cable).
• Undock the Stacker before you move the machine. While moving the machine, always exercise
care and make sure that the power cord will not be damaged under the machine.
• Always contact service if relocating the equipment.
• Do not move the machine while the machine is running.
• Do not open covers while the machine is running.
• Do not switch off the power while the machine is running. Make sure the machine cycle has
ended.
• Lay the power cord in a way that nobody will stumble over it. Do not place things on the cord.
• Never attempt any maintenance function that is not specifically described in this
documentation.
• Always keep magnets and all devices with strong magnetic fields away from the machine.
• If the place of installation is air-conditioned or heated, do not place the machine where it will be:
• Subject to sudden temperature changes.
• Directly exposed to cool air from an air-conditioner.
• Directly exposed to heat from a heater.
• If the machine is not used over an extended period of time it should be unplugged to prevent
damage in the case of overload.
There are six “Pinch Hazard” stickers on the Stacker to remind the user to pay extra cau-
tion when the machine is running:
• Do not have body parts or objects under the table when the Stacker is loaded or in use.
• Do not have body parts or objects between the upward moving table and the side
guides.
General safety, continued
PINCH HAZARD:
WARNING:
Do not put fingers or other parts between moving parts.