Plockmatic MPS XL, Руководство по эксплуатации

Страница: 31 / 44

31
4. Maximum Stack Height
Stack Limit
Infeed Sensor and Line speed determine stack limit heights. These limits are set to prevent
weight overload (over 40kg / 88.18lbs).
The maximum stack height per the specification is seen in the table below. When the maximum
stack height is reached, printing will be paused.
For standard sheet sizes up to SRA4/9x12’’, a full stack of 330mm / 13’’ will be stackable.
As sheet sizes increase, the 40kg (88.18lbs) weight limit will come into play and maximum
stack height will be reduced.
After maximum stack height is reached, empty the Stacker and press the pause/resume
button on the control panel to resume printing.
*Maximum stack height may be less if using high density paper, due to the weight limit of
40kg (88.18lbs). Variation in stack height could be seen due to specific media weight and type.
Maximum Stack Height*
For Sheets ≤715mm (28.1’’): 330 mm (13”)
For Sheets
≥
715mm (28.1’’): 140 mm (5.5”)