Plockmatic MPS XL, Руководство по эксплуатации

Страница: 15 / 44

15
1
The Paper Support is a key part of the Stacker that helps support the sides of the paper
stack while stacking. It needs to be removed and attached for each new paper size and
will be referenced throughout this document.
Move the Paper Support after releasing the Paper Support Plungers (one on each side).
NOTE: the Paper Support Plungers are spring loaded: to release they must be held
out of the Positioning Holes (x9).
To attach or remove the Paper Support, the Paper Support Plungers must be held out of
the Positioning Hole and moved to desired position from underneath the Stacker Table.
When using the Sheet Guide, the Paper Support should be set to the position closest to
the Sheet Guide.
When using the Long Sheet End Stop, the Paper Support should be set to half of the
paper's length.
Paper Support Plungers Positioning Hole
Paper Support
Setting the Paper Support