Plockmatic MPS XL, Руководство по эксплуатации

Страница: 14 / 44

14
1
1 1
Push the docking release pedal [A].
2 2
Move the Stacker away from the upstream device.
1 1
Move the Stacker close to the upstream device and dock it. The guide plate slots [C]
are spring loaded and will dock with a simple push towards the guide poles [D].
NOTE:
The guide pins [A] fit into the holes [B], the guide plate slots [C] mate to the docking guide
poles [D].
Undocking the Stacker
Docking the Stacker
A
D
B
C
A A B
Stacker
Docking Plate
A
NOTE:
Raising the Stacker Table before undocking the Stacker will make it easier to remove the
finished prints