1300 S. Wolf Road • Des Plaines, IL 60018 • Phone 800-323-5068 • Visit us at www.acuitybrands.com/aculux
©2017 Acuity Brands Lighting, Inc. Rev 3/17 P6160
Product Services Phone (888) 387-2212
1 of 5
INSTALLATION INSTRUCTIONS
DMX512 / RDM FIELD INSTALLATION MANUAL
Required Materials for Network Installation
Aculux recommends installer seek quotation for start-up/commissioning services from Acuity sales agency or theatrical dealer prior to installation.
DMX Quick Installation Guide (Downlights Only)
Install Fixtures
and Controller
Terminate Network
Cables
Plug Cables into
Fixtures
– Aculux LED Fixture with DMX512 (abbreviated here as DMX)
– DMX Controller (e.g. Fresco FCS7TSNX or similar)
– RDM Configuration Device (e.g. Fresco FCS7TSNX or DXT1M122M09NE1L)
– DMX/RDM Splitter (Optional, e.g. Fresco DXT1M122M09NE1L)
– Twisted pair, 120ohm, shielded cable (e.g. Belen 9842 or equal)
– Termination Resistor (Pre-installed in every Aculux DMX fixture)
– Small slotted screwdriver
Common Data (-) Data (+)
Fixtures in middle
of run
Data out to next fixture
Data in from controller or previous fixture
Fixtures at end
of run
Termination Resistor
Data in from controller or previous fixture
1.
2.
3.
DISCONTINUED
