CIP Training
Plockmatic LCT3500 Large Capacity Tray
Setting Up a Job
Setting the Paper Type
Select [Paper Size] to enter the size of
the media loaded.
Select [Paper Weight] to enter the
correct paper weight range of the media
loaded.
Turn on/off [Paper Coating] depending
on whether the loaded media is coated
or not.
Perform this procedure for each of the
two vacuum trays and for the optional
LSM module.
Push the green check mark to confirm
the changes or the red cross to discard
them and to go back to the main menu.
Paper size:
This menu allows the user to choose the
paper size: the user can either select
one of the standard sizes or input a
custom size. If [Auto] is selected, the
LCT will detect the type of paper loaded
in the trays, thanks to the position of
the side guides. Note that this function
will work only with certain types of
standard formats, see "auto paper size
detection" at the end of this manual. If
the LCT is not able to identify the paper
loaded, a "size unknown" message
will be displayed on the machine´s UI.
Push the green check mark to confirm
the changes or the red cross to discard
them and to go back to the main menu.
Custom paper size:
Selecting [Custom Size] will open a
new screen that allows for inputting of
custom values, plus it will recall the last
custom size inputted
.
Push the green check mark to confirm
the changes or the red cross to discard
them and to go back to the main menu.