CIP Training
Plockmatic LCT3500 Large Capacity Tray
Basics
NOTE: on the rear side paper guide,
there are three marks that indicate
the paper loading limit. The paper
stack height should not exceed these
indications. Below are the maximum
stack heights for each type of paper
thickness / type:
Plain Media:
•
70 mm: 80-105 gsm;
•
50 mm: 105.1-256 gsm;
•
30 mm: 256.1-400 gsm.
Coated Media:
•
50 mm: 80-105 gsm;
•
30 mm: 105.1-400 gsm.
Loading Paper
D
B
E
C
A
11
Pull the paper guides [A] and [B] outwards to gain space to insert the stack of sheets;
22
If the paper sheets require a long tray base, pull the LSM extension [C] out;
33
Prepare the stack of paper following the procedure described in the “Job preparation”
section;
44
Push paper guides [A] and [B] in so that they touch the stack of paper;
55
Push the lever [D] down to lower the LSM tray table;
66
Place the stack so that the leading edge of the sheets is placed below the feed rollers [E];
7
7
Pull the lever [D] upwards.
70 mm limit
50 mm limit
30 mm limit
70 mm
50 mm
30 mm
