Plextor PX-750A Скачать руководство пользователя страница 55

Страница: 55 / 112

Section 3. Installing the PX-750UF External USB/FireWire Drive

PX-750 Installation and Users Manual

Switching Between USB and IEEE 1394
Interfaces

You can connect any or all of the interface cables (USB, IEEE 1394
4-pin, and IEEE 1394 6-pin) and switch between them. You can even
have different cables attached at the same time, allowing more than one
computer to share the PX-750UF.

To switch between interfaces attached to the PX-750UF:

1. Ensure an interface cable for the desired USB or IEEE 1394

interface is attached to the PX-750UF and to the computer.

2. At the rear of the PX-750UF, set the interface switch to the desired

interface.

3. Cycle the PX-750UF power. (That is, turn the PX-750UF’s power

switch off, then on again.)

If You’re Using FireWire

If you are using FireWire (IEEE 1394), remember these hints for better
operation:

•

Do not daisy-chain the PX-750UF; that is, do not connect it to the
same cable along with other FireWire devices.

•

The PX-750UF is not bus powered—that is, it doesn’t get its power
from the IEEE 1394 cable—so you have to use the bundled AC
adapter.

Содержание PX-750A

















































































































Результаты поиска

Содержание PX-750A

Отзывы:

Plextor PX-750A, Инструкция по установке и эксплуатации, Страница: 55 / 112

Результаты поиска

Содержание PX-750A

Отзывы: