Planmeca Sovereign Classic, Руководство пользователя

Страница: 127 / 298

If you activate the cup fill with a long push, water flows for as long as the
knob or pedal is pushed.
23.2.3 Adjustments
The flow rate of the cup fill can be adjusted by turning the black knob inside
the unit, see section "Adjusting cup fill and bowl rinse flow rates" on page
188.
The duration of the cup fill can be programmed, see section "Duration of cup
filling" on page 189.
23.3 Timer
About this task
The timer memory contains six preprogrammed time settings. Follow the
steps below to activate a timer.
NOTE
Other functionalities can be used while the timer is running.
NOTE
The timer can not be run from the foot control.
Steps
1. Press Timer to open a list of available timers.
2. Select a timer from the list.
The Timer button’s indicator light is lit and the duration of the timer is
displayed on the control panel.The countdown begins immediately, but
the selected time is displayed for four seconds before the actual
countdown is displayed.
If you wish to close the list without selecting a timer, press Close.
Results
When the timer reaches zero you will hear a short signal and the indicator
light goes off.
The function can be cancelled by pressing Timer again.
The preset timers can be reprogrammed, see section "Timer settings" on
page 188.
23.4 Door open
When the door open -function is enabled, the Door open button is displayed
on the control panel and you can open the door from the control panel or the
foot control.
23 Operating dental unit
User's manual Planmeca Sovereign Classic 117