Planmeca Sovereign Classic Скачать руководство пользователя страница 147

Страница: 147 / 298

an alternative instrument logic can be taken into use for four-handed

dentistry. Please contact your Planmeca dealer.
In intelligent four-handed dentistry one instrument can be left waiting in a

queue so that it is ready for use when the dentist returns the active

instrument to the instrument console.
The intelligent four-handed dentistry follows the principles described below.

The active instrument can be operated with the foot control and its settings

are displayed on the control panel and they can be changed.
The instrument logic does not control the syringe which can be used at any

time.
1. When the dentist picks up instrument 1 from the instrument console, it

becomes the active instrument. The dentist can drive it with the foot

control pedal (a short push to the right/left or down is enough).

2. While the dentist drives instrument 1, the assistant can pick up

instrument 2 for preparation and the instrument goes to the instrument

queue.

NOTE

Only one instrument at a time can be in the queue. If two or three

instruments are picked up while driving an instrument, only the

instrument that was picked up last will remain in the queue.

3. The dentist returns the active instrument (instrument 1) to the instrument

console and immediately the instrument in the queue (instrument 2) is

activated and handed to the dentist by the assistant. Instrument 2 can be

driven with the foot control as described above.

24.2 Micromotor

24.2.1 Micromotor presets

The current preset is displayed on the control panel. When you press the

Preset button, a new window with a list of all presets opens. You can scroll

the list either from the list itself, from the scroll bar to the right, or by using

the Up and Down buttons. To select another preset, press the name of that

preset.
The preset list can also be programmed to be opened from the foot control.

For programming instructions, see section "Foot control functions" on page

200.

24 Operating instruments

User's manual

Planmeca Sovereign Classic 137

Содержание Sovereign Classic











































































































































































































































































































Результаты поиска

Содержание Sovereign Classic

Отзывы:

Похожие инструкции для Sovereign Classic

Бренды по названию

Популярные бренды

Planmeca Sovereign Classic, Руководство пользователя

Результаты поиска

Содержание Sovereign Classic

Отзывы:

Похожие инструкции для Sovereign Classic

Бренды по названию

Популярные бренды