26.15 Foot control functions
About this task
The functions that are activated when you push the side knobs or the pedal
can be programmed. The available options depend on the selected
instrument model and are displayed in the programming window.
The options are described in section "Foot control functions" on page 69.
When you program the foot control functions, you can select between the
single-push mode and the short & long push mode.
•
Single-push mode
You can only program one function for each position.
•
Short & long push mode
You can program two functions for each position. One of the functions is
activated by pushing the knob or pedal briefly and the other by pushing
the knob or pedal for slightly longer.
NOTE
The Drive chair to rinsing position -function is a factory default function on
the foot control, but can not be programmed to the side knobs or pedal. If
you program another function to replace the Drive chair to rinsing position -
function you must later reset the foot control functions if you want to return
the Drive chair to rinsing position -function to the foot control.
NOTE
The functions programmed for a certain instrument model apply to all
instruments of the same model.
NOTE
Programming the rotation direction for one micromotor will affect all
micromotors.
NOTE
If Reverse rotation has been programmed to be activated from the foot
control, the Reverse button on the touch panel’s instrument view is
inactivated.
NOTE
The intraoral scanner activation is programmed in the idle view and
deactivation in the instrument view.
Steps
1. If you are programming foot control functions for an instrument, activate
the instrument.
2. Press Program.
26 Programming
200 Planmeca Sovereign Classic
User's manual
Содержание Sovereign Classic
