Planmeca Sovereign Classic Скачать руководство пользователя страница 264

Страница: 264 / 298

Help messages

HELP

CODE

MEANING

ACTION OR EXPLANATION

HE1049

PlanID tag assigned to user successfully. PlanID tag assigned to user successfully.

HE1050

HE1051

User already logged in.

HE1052

User profile copied from Romexis.

HE1053

Incompatible Romexis version.

HE1054

Unknown Romexis user.

HE1055

Failed to send user profile to Romexis.

HE1056

Romexis offline.

Romexis is offline. The requested

operation could not be completed.

HE1057

Romexis error; using local user profile.

Romexis is offline. The unit uses the local

user profile.

HE1058

Romexis offline; using temporary local

user profile.

Romexis is offline. The unit uses a

temporary local user profile.

HE1059

Romexis offline; could not find user.

Romexis is offline. The unit could not find

either a local or a temporary local user

profile.

HE1060

Romexis version mismatch; using local

user profile.

Romexis version does not support user

profiles. The unit is using the local user

profile.

HE1061

Romexis version mismatch; using

temporary local profile.

The current Romexis version does not

support user profiles. The unit uses a

temporary local user profile.

HE1062

Romexis version mismatch; could not find

user.

The current Romexis version does not

support user profiles. The unit could not

find either a local or a temporary local

user profile.

HE1063

Settings copied to Romexis.

Settings have been copied to Romexis.

HE1064

Settings copied from Romexis.

Settings have been copied from Romexis.

HE1065

Romexis user ID already in use.

The Romexis user ID is already in use by

some other user.

HE1066

The unit has rejected a login request

because login is already in progress.

HE1067

Different user already logged in.

The unit has rejected a login request

because a different user is already logged

in.

HE1068

Romexis version mismatch.

Romexis version does not support the

requested operation.

HE1069

Failed to load user settings.

The unit has failed to load user settings

and has replaced them with factory

defaults. Check your user settings before

continuing.

HE1070

Wrong Romexis user name for the PlanID

tag.

Correct the Romexis username.

HE1073

Assigning in progress, please wait.

31 Help and error messages

254 Planmeca Sovereign Classic

User's manual

Содержание Sovereign Classic











































































































































































































































































































Результаты поиска

Содержание Sovereign Classic

Отзывы:

Бренды по названию

Популярные бренды

Planmeca Sovereign Classic, Руководство пользователя

Результаты поиска

Содержание Sovereign Classic

Отзывы:

Бренды по названию

Популярные бренды